Loading... Please wait...
  • Image 1
  • Image 2

TrekPak Kit for 1510

Product ships within two business days of order.

Product Description

You’ve always trusted Pelican™ to protect your sensitive gear. Now with our exclusive TrekPak™ system you can kit out your case with the precision your equipment deserves. At just 7/16” (1.1 cm) thick these rigid panels form a precise grid of protection without wasting any space. 

Trimming the dividers is a snap. The included double blade cutting tool makes a perfect cut every time. Together with the included 1” (2.54 cm) bottom foam and convoluted lid foam, the TrekPak system forms a 360-degree cocoon inside your Pelican case.

Kit includes:                                                                  
Two perimeter wall panels
Two dividers 20" (50.8 cm)
Two dividers 15.75 - 18.75" (40.005 - 47.625 cm) length may vary
One divider 6 - 8" (15.24 - 20.32 cm)
length may vary                                                            
(All divider panels 5"/12.7 cm height)                
Twenty (20) pins and pull tabs
One cutter tool
Convoluted lid foam and bottom foam 

Find Similar Products by Category

Product Reviews

Write your own product review

Showing reviews 1-10 of 73 | Next

  1. Finally my Pelican's are complete! 5 Star Review

    Posted by on 16th Feb 2018

    Thanks to TrekPak my Pelican cases (any many more in the future) are complete!

    The hardest thing to do with Pelican cases is the internal customization, Pick and Pluck was a nice start but it broke down (literally) the 1st time you use it.

    Padded dividers were good but tend to be difficult to keep in place and with the velcro hard to position.

    Out comes TrekPak and once you setup your gear and make the cuts (if you're efficient you'll have left over material if not you can get more) the equipment is firmly locked into a nice little nest that doesn't slip, float around or damage other gear. Also it's so easy to move around and re-customize and from from what I can tell, will easily outlast the previous 2 solutions.

    This product is the only internal case components I will use on my Pelican's going forward. For camera equipment I can load a 1510 with 2 pro DSLRs, 3 lenses, batteries, audio gear, flashes, chargers, cables and the slot for my 70-200 lens is also the perfect fit for a Canon XA30 without making any changes to the internals for my video production! This all finally makes sense!

    My hope is to see TrekPaks for the smaller Pelican cases so that I can shift wireless microphones and GoPro gear from where they travel today to the security of a TrekPak Pelican case.

  2. If your traveling with equipment you need this case. 5 Star Review

    Posted by on 22nd Jul 2017

    I've owned or own 20 different types of camera case. From backpacks to shoulder bags I purchased lots of different types, and brands. I've tried to easily and safety move my equipment but have always worried. This is the first time I feel good about how the equipment is stored and protected. The trekpak system allowed me to arrange the equipment so it is protected but easily accessed. I never liked the idea of pluck and pick foam, but this is a lot better. Great idea from start to finish.

  3. Really great - wish it was easier to get in the UK 4 Star Review

    Posted by on 3rd Feb 2017

    Great quality and means I can get everything in a 1510 rather than split into 2 cases. Loses one star as had to import to UK which with shipping & taxes doubles the cost.

    Please get a UK distributer and I will buy more!

  4. Ultra-Professional 5 Star Review

    Posted by on 19th Jan 2017

    Having a TrekPak setup in my case was the best thing for my gear! With the liners being customizable, I was able to make custom "cubbies" for all my gear. Very happy with the product and I'd definitely recommend to a friend.

  5. More space and less humidity 5 Star Review

    Posted by on 8th Jan 2017

    I purchased the TrekPak divider kit to replace the padded divider that came with the Pelican 1510 case. I can honestly say that I gain more space, my guesstimate is about 10% to 15% more. I also noticed that that the TrekPak retains less or no humidity compare to the padded one. My assumption is based on having a hygrometer in the case and a couple of rechargeable pelican desiccant cases/packs. It was taking longer for the packs to absorb the humidity inside the box when I had the padded dividers compare to the TrekPak. It was probably because of the cloth-like(polyester or nylon) material on the padded dividers.

  6. New format is perfect for ultimate gear safety 5 Star Review

    Posted by on 13th Dec 2016

    I've been a Trek Pak user since the beginning and had recent acquired a new camera.

    I ordered a Pelican 1510, and the Trek Pak Insert and was surprised to see what showed up. The new Trek Pak as I say it, is several long pieces that are not pre cut. This included a cutting tool, which works amazingly well.

    In the past, you had pre-cut pieces you needed to figure out how to use and always had extras after I was done. With this new system, I can truly put together the ultimate in gear storage, in exactly the manner I wanted.

    My Red Epic-W 8K camera thanks you!

  7. Best Way to Protect Your Gear 4 Star Review

    Posted by on 8th Nov 2016

    Let me start by saying the Pelican 1510 insert is the third one I've purchased, having previously bought the RolliPak 48 for a backpack, and the Pelican 1650 inserts. Clearly I like the product. How much do I like it? When I got an email from TrekPak telling me this insert set was on sale, I purchased it immediately. Without actually owning the Pelican 1510 case. Yep. I like TrekPak products that much. (For the record, it was a great price - $87.97 with free shipping).

    So I went out and bought the Pelican 1510 case ($110 without foam on jet.com) and how do I like my 1510 kit? It's exactly as I would expect, which is a good thing. I can keep everything packed nice and tight, and the padding is just enough to keep things safe, without wasting space. I had plenty of pins and a small amount (maybe 10") of the dividers left over, but as I said, I packed it pretty tight. (I'll list everything in the case at the end of my review). If you plan on dividing the case length-wise, I would probably purchase the dedicated divider they sell.

    So why only 4 stars? The only negative about this kit is that the provided foam doesn't completely cover the wheel wells at the bottom, or the recessed space at the top for the pull-out handle. In my case, both issues are minor because I was able to place items that were already padded (or weren't fragile) in those spots. But I could see how it could be a problem for another user with a different layout. Otherwise, I think it's a great product, and won't hesitate to purchase this insert or any other inserts I might need in the future.

    So what's in my case? This is my mobile portrait kit: Canon 5D3 with battery grip, Canon SL1 with 24mm Pancake, 2 Pelican memory card cases (CF & SD), EF 24-70mm 2.8L II, EF 70-200mm 2.8L II, 82mm Circular Polarizer in case with Step-Up Ring, 3 Yongnuo Flashes in pouches, Rogue Grid and Gel kit, 2 Yongnuo 603C receivers, 1 Yongnuo 560TX trigger, 32 spare batteries (AA & AAA) in 8-pack hard cases, 3 spare batteries for the cameras, 2 Canon battery chargers and 1 Eneloop AA/AAA battery charger. It's a lot of stuff, and the case holds it beautifully.

  8. great product, too much shipping costs 5 Star Review

    Posted by on 12th Oct 2016

    I absolute love my trekpak insert for my 1510. You gain space in your case with this insert. but the shipping costs are to high. I know they are a small business but €105 to ship to the Netherlands. but that is way to high. And I didn't get any stickers with my shipment that I can put on my cases

  9. You gain space with this system! 5 Star Review

    Posted by on 5th Sep 2016

    I am now a believer and a fan. Yes, it is a bit more expensive than the foam dividers and pluck foam, but worth it. The system is so efficient with space that you gain space for more equipment. Which is very important for the 1510 case, where you only have a certain amount of room to work with. The dividers are rigid while soft enough to protect. And it looks sharp like a custom case!
    My complaint (which is minor) is that this 1510 insert does not cover the wheel wells in the interior. I had to cut some scraps and double stick velcro them around the wheel humps to fully cover the interior. Not hard but another step.
    And, for the price TrekPak, throw in one more divider and a few more pins.

  10. Great product, shame about the shipping 5 Star Review

    Posted by on 18th Aug 2016

    The product does exactly what the peli insert should. It's a shame it isn't distributed in the UK so shipping is over £50 and then TrekPak don't include the import tax in that and don't tell you so you get slapped with massive import tax on top. Shame it ruins such a brilliant product

Showing reviews 1-10 of 73 | Next

Customers Who Viewed This Product Also Viewed