Rolli is designed to replace the velcro system currently taking up space in your camera bag or roller bag. Using the velcro already seen into your bag, simply unroll Rolli into the perimeter of your bag, cut to length, and you've been TrekPak'd!
One • 48" + One • 24" perimeter pieces
4 • 23 inch dividers
30 pins with 30 red pull tabs.
Sizing: We need 2 measurements from you!
1. Measure the height of the dividers currently in your bag. Round DOWN to the closest height offered in RolliPak. We ask that you round down to insure you can still close your bag with the system in place since TrekPak dividers do not squish!
2. Measure the inside perimeter of your bag (this is the total length around the inside of the bag where you wish to stick RolliPak).
• Rolli 72 is 72" long! If you bag perimeter is slightly bigger than 72", we suggest buying only 1 Rolli 72 and placing the gap in a section where you do not need to pin dividers.
Posted by Chris Day on 19th Jul 2016
I recently purchased a Pelican Air 1535 case with Trekpac and immediately loved this system. Not only is it a great idea, it is versatile, easy to use, performs well and looks great.
Moving on to the backpack, I was convinced I could make more space with Trekpak and I was right. I pulled out the Velcro and designed a layout that suited my kit, works a treat and I have more room for more kit tray the Velcro which had fatter dividers
I do agree with others that the 72 roll should be in one piece but it wasn't really an issue as the pins work so well. Very happy with the result and will look for other uses
Posted by jim on 22nd Feb 2016
New project, 2nd purchase. Used rollipak, in think tank bag, hate velco. Only neg was used 72 inch roll, came in two peices. Should be one piece, still worked out , but one piece would have saved a little frustration. All my bags and hard case use this system. Will use this product untill something better comes along. Not likely tho
Posted by JH on 16th Feb 2016
This is a great product and engineered better than expected. The pins work great and the RollPak is very well made. It was easy to use and make a custom design for my backpack. I highly recommend this product.
Posted by Barry Wood on 16th Sep 2015
I wanted to put together a custom case for my dynamic mics that was flat, an provided easy access. With the Rollipak I was able to outfit a guitar pedalboard case with each mic in it's own section.
Posted by Unknown on 12th Jun 2015
I thought replacing the velcro with Rollipak would make everything thing easier. The Rollipak takes alot of space in the bag which makes it hard to fit same lenses you fit with velcro. I spent $125 for nothing makes the bag tighter and could not fit my lenses I used to fit in the velcro. Another thing the Rollipak is easy to setup this is the only good thing about it.
Posted by Mike on 29th Sep 2014
The only complaints is there isn't much protection offered by the system (I used some padded compartments that came with my bag to store my lenses in), some sort of customisable padding would be handy, and if I'm being really picky the 72 rollpak perimeter actually came in two pieces rather than a single 72" section, which would make it a bit more ridged.
Posted by Unknown on 7th Aug 2014
This product was perfect for making my camera bag nice and tidy.
Posted by Stefan on 15th Oct 2013
Very nice product! Actually, quite genius! I use it now in my Manfrotto Lino Pro VII backpack, (6") for a RED Epic and accessories and it fits perfectly and gives me the ability to customize WITHOUT that awful velcro, that drives me crazy!
I got so many spare pieces in the package that I could save some and ALSO fit a small pelican to carry my lenses, which was a welcome surprise!
(I split the TrekPak pieces in half for the small case and I was lucky I also bought a extra Pin Pak that went into the small Pelican.
My only pathetic issue now is that the Manfrotto padding had a great smell that I will miss. Thats one of those serious problems to have :D
Thank you for inventing this!!
Posted by Jim on 10th May 2013
Purchased the rollipak, for my think tank bag. was a little tricky getting the velcro side align properly in the bag, but once that was done, it was almost fun configuring my set up. certainly easier than the velcro inserts, . I also purchased a rollipak for my hard case. It had a padded insert in it that allowed me to use the rollipak. The inserts are thin enough,
I did not lose any space in the case. Also with the pin system, if an insert is
not long enough I can overlap two pieces and pin together, works great. On the six inch rolli, I would like to see a little longer pen, I believe it would make
the inserts a little more stable at the bottom, but the one's supplied, do the job.
no more cuts around the finger nails from prying velcro pads out of a case. The only negative is the cost, but then with photography nothing is cheap. like the product and would recommend it highly
Posted by Scott on 7th May 2013
Perfect product. The only obstacle standing in the way of a 5th star would be a "user customized" padded insert. Most decent backpacks have some sort of padded back but the front would be nice to pad as well.
Infinitely customizable, and easy to assemble. Great product.