3 x 3 x 3/4" (2cm) perferrated lens pads perfect for stacking lenses in deeper cases
Posted by steve on 10th Aug 2016
I needed to modify these lens pads to fit my small lenses but they work perfect. Keep everything safe in my case. Easily pulled apart and they stay in bottom of the bag when I remove my lenses. Must for shorter lenses.
Posted by Kevin on 23rd Jun 2016
Just ordered a Pelican 1485 with the Trekpak inserts, and had a few smaller lenses that I wanted some extra protection for. This sheet (I ordered the 3/4" version) was perfect! I placed the inserts beneath the lenses and they fit snugly into their compartments with the case holding them in place.
These would also be great for "sandwiching" smaller items like TCs into a case as well.
Posted by Van H on 4th Jan 2016
I purchased the TrekPak for my Pelican Elite Luggage that I use for my Lumix mittorless cameras and lenses. Some of my lenses are very small and difficult to retrieve from the TrekPak holes. The Lens Pads are a perfect way to keep the lenses near the top of the divided holes and easy to retrieve.
The TrekPak was custom made for my Pelican case, and the lens pad is custom made for the TrekPak. A perfect solution.
Posted by Matthew on 1st Jun 2015
I had to order this after I got the dividers and I recommend purchasing them when you order the dividers as you will quickly find that you need to raise things in your case to get to them. I ordered a 3/4" and a 1" and used nearly all of it. I put some on its side to raise up a long and narrow thing and some on its side cut and the cut pieces to put a thing between the wheel wells of my Pelican 1510 then put another thing on top of that for a layer.
I was thinking about getting foam from other sources however due to the different densities,cohesiveness, and durability of different types of foams I decided to just get these as they are known to work for this application and the foam is the same as the rest of the foam from the divider set for my case.
Posted by Gerry Chua on 28th May 2015
I purchased the uncut version to fit the Pelican 1510. This was for my 2 Leica bodies and numerous lenses. Since the Leica M lenses are a bit smaller in footprint and size compared to SLR lenses, this was a good idea of getting the 3x3 lens pad.
This makes the lenses easy to get to. However, I realize the $8.00 cost for 6 pads was too high and not enough for what I needed. I went to Michael's and bought a 12x16 inch styrofoam pad for $6.00. This was the better alternative and the extra work of cutting the foam was not a big deal.
Posted by Tony Hazell on 4th Apr 2015
Very useful addition to my Pelican case. Makes accessing lenses very easy (and it makes the case look neater too)